The most impressive work on a car can be the final painting job done on it. Painting cubicles that produce properly painted cars meet some set standards for the automotive spray booth. For any booth to be termed as good, there are several things that should be considered. When cars are painted in standard painting cubicles, they come out looking exactly as what was expected.
There are various standards that are set for painting booths that should be met by any body shop that does spray painting. Environmental standards are set to ensure that the body shops do not emit a lot of fumes that will, in turn, harm the environment. Some body shops tend to go around these regulations to make more profits. The following are important reasons for using painting booths that cut across all body shops.
Although any automobile body shop will always have dust, a good painting booth should have less dust. The technicians should make sure that the dust is wiped off from the surface of cars, and proper coating of paint is used to reduce the accumulation of dust. For prevention of dust from a cubicle the following can be done; ensure that only authorized personnel access the cubicle, the cubicle is under appropriate pressure, it is constantly clean, and no debris inside and the doors are sealed, and the floor is concrete.
The cubicle should have improved quality than the body shop. The lighting inside the cubicle should allow for precision from the painters. Painters ought to see what they are doing without any difficulties. They also need to see the spots that they have missed and areas where there are laws that should be corrected. This ensures that the final job will meet the expected standards.
Over-spray is one of that way through which body shops make loses. The cubicle should be equipped with ventilation that will help in reduction of over-spray. Downdraft equipment fitted within the painting cubicle should be able to prevent over spraying and save the body shop on paint and other solvents. When the painters apply the essential techniques when painting any car, the downdraft system that is installed will help in preventing paint from spreading to unwanted areas.
Contains and reduces the toxic fumes that are produced by paints when painting. Most body shops are trying to use paints that have fewer emissions that may affect the environment. Even though they have reduced emissions, the cubicle should be able to further reduce the fumes. These fumes are very harmful to humans. The ventilation of the cubicle should the away from where the worker work and away from the nearby buildings. This ensures a safe environment for workers.
The safety of the cubicle will ensure that the workers are always distant from harming themselves. The tools and the safety suits that the painters wear when doing their job should be of standard. The environment inside cubicle should allow for the workers to work without worry of being in danger.
Getting a body shop that is well equipped with a painting cubicle that meets all standards can be difficult. For the safety of your workers and car, you should ensure that you get a body shop that follows all the regulations that have been set.
There are various standards that are set for painting booths that should be met by any body shop that does spray painting. Environmental standards are set to ensure that the body shops do not emit a lot of fumes that will, in turn, harm the environment. Some body shops tend to go around these regulations to make more profits. The following are important reasons for using painting booths that cut across all body shops.
Although any automobile body shop will always have dust, a good painting booth should have less dust. The technicians should make sure that the dust is wiped off from the surface of cars, and proper coating of paint is used to reduce the accumulation of dust. For prevention of dust from a cubicle the following can be done; ensure that only authorized personnel access the cubicle, the cubicle is under appropriate pressure, it is constantly clean, and no debris inside and the doors are sealed, and the floor is concrete.
The cubicle should have improved quality than the body shop. The lighting inside the cubicle should allow for precision from the painters. Painters ought to see what they are doing without any difficulties. They also need to see the spots that they have missed and areas where there are laws that should be corrected. This ensures that the final job will meet the expected standards.
Over-spray is one of that way through which body shops make loses. The cubicle should be equipped with ventilation that will help in reduction of over-spray. Downdraft equipment fitted within the painting cubicle should be able to prevent over spraying and save the body shop on paint and other solvents. When the painters apply the essential techniques when painting any car, the downdraft system that is installed will help in preventing paint from spreading to unwanted areas.
Contains and reduces the toxic fumes that are produced by paints when painting. Most body shops are trying to use paints that have fewer emissions that may affect the environment. Even though they have reduced emissions, the cubicle should be able to further reduce the fumes. These fumes are very harmful to humans. The ventilation of the cubicle should the away from where the worker work and away from the nearby buildings. This ensures a safe environment for workers.
The safety of the cubicle will ensure that the workers are always distant from harming themselves. The tools and the safety suits that the painters wear when doing their job should be of standard. The environment inside cubicle should allow for the workers to work without worry of being in danger.
Getting a body shop that is well equipped with a painting cubicle that meets all standards can be difficult. For the safety of your workers and car, you should ensure that you get a body shop that follows all the regulations that have been set.
About the Author:
You can get excellent tips for choosing an automotive spray booth manufacturer and more information about a reliable manufacturer at http://sprayzone.net now.
No comments:
Post a Comment